|
If your installation calls for sending a video signal over multiple monitors, use one of our video distribution amplifiers. If your installation demands very long camera cable runs, use one of our video camera amplifiers.
| CB001VH Coaxial BALUN For DVR |
 |
Features: - BNC male to BNC female with mini cable 30cm.
- Perfect work with DVR to immunity DVR interference.
- Built in a highly balanced mode of video transmission, which is immune to interference from these, and other sources of noise: Data signals, other video signals, nearby power, ringing telephones, fluorescent lights, transformers, and more...
|
CD102 1 Input to 2 Output Video Distributor
 |
- Features:
- One video input to two video output.
- Dual Power: DC12V / AC24V.
- Red LED: power on/off.
- It can be connected video camera, multiplexer, VCR, DVR.etc.
- Power supply included.
|
CD102A 1 Input to 2 Output Video Distribution Amplifier
 |
Features:
- 1 video input to 2 video output.
- 10dB video gain compensation amplification and HF compensation.
- Sharpness and Brightness adjustment, perfect to work with DVR.
- Transmission range: 1000 meters (RG59 coaxial cable)
|
CD104 1 Input to 4 Output Video Distributor
 |
Features:
- One video input to four video output.
- Dual Power: DC12V / AC24V
- Red LED: power on/off.
- It can be connected video camera, multiplexer, VCR, DVR.etc.
- Power supply included.
|
CD108 1 Input to 8 Output Video Distributor
Features:
- 1 video input to 8 video output.
- Dual Power: DC12V / AC24V.
CD408 4 Input to 8 Output Video Distributor
 |
Features:
- 4 video input to 8 video output.
- Dual Power: DC12V / AC24V
|
CD408A 4 Input to 8 Output Video Distribution Amplifier
 |
Features:
- 4 video input to 8 video output.
- 10dB video gain compensation amplification and HF compensation.
- Sharpness and Brightness adjustment, perfect to work with DVR.
- Transmission range: 1000 meters (RG59 coaxial cable)
|
CD816 8 Input to 16 Output Video Distributor In 1U Rack Mounting Panel
 |
Features:
- 8 video input to 16 video output.
- Dual Power: DC12V / AC24V.
- AC24V Power supply included.
|
CD816A 8 Input to 16 Output Video Distribution Amplifier In 1U Rack Mounting Panel
|
Features:
- 8 video input to 16 video output.
- 10dB video gain compensation amplification and HF compensation.
- Sharpness and Brightness adjustment, perfect to work with DVR.
- Transmission range: 1000 meters (RG59 coaxial cable)
|
CA101 1 Input to 1 Output Video Amplifier
 |
Features:
- 1 video input to 1 video output.
- 10dB video gain compensation amplification and HF compensation.
- Sharpness and Brightness adjustment, perfect to work with DVR.
- Transmission range: 1000 meters (RG59 coaxial cable)
|
CA101A 1 Input to 1 Output Video & Audio Amplifier
 |
Features:
- Video & Audio Amplifier.
- Others identical same as CA101.
|
CA101VH 1 Input to 1 Output Video Amplifier, HF/MF/LF Compensation
 |
Features:
- HF,MF,LF compensation for color gain and adjustable brightness & contract for cleaner, sharper looking picture.
- Built in Input Impedance, Balance, Liner Gain adjustment.
- Built in Surge Protection.
- Perfect to maintain good quality picture for long-range transmission with DVR.
- Transmission range: 1500 meters (RG59 coaxial cable)
- Use with CA101, transmission range could up to 2KM.
|
CA404 4 Input to 4 Output Video Amplifier
 |
Features:
- 4 video input to 4 video output.
- 10dB video gain compensation amplification and HF compensation.
- Sharpness and Brightness adjustment, perfect to work with DVR.
- Transmission range: 1000 meters (RG59 coaxial cable)
|
Specifications:
| ITEM |
CA101VH |
| Video input |
0.12-2 Vpp |
| Input impedance |
45 - 175 Ohms |
| Video output |
1 Vpp, 75 Ohms |
| Freq. response |
50 Hz - 5 MHz(-3 dB) |
| Disturbance reduction |
> 70 dB, 50Hz |
| Gain adjustment |
+6 dB.+60 dB at 5 MHz |
| Noise |
-50 dB at+40 dB gain adj.
-47 dB at+60 dB gain adj. |
| Power supply |
DC12V, 150mA (max) |
| Input protection |
Surge arrester |
| Indicators |
LED (Red)-power on |
| Distance (M) |
|
| 0-300 |
X |
| 300-600 |
SW1(1,2) to SW1(1,2,3) up |
| 600-900 |
SW1(1,2,3) to SW1(1,2,3,4,5,) up |
| 900-1200 |
SW1(1,2,3,4,5,6) to SW(1,2,3,4,5,6,7,8)+SW2(1) up |
| 1200-1500 |
SW1(1,2,3,4,5,6,7,8)+SW2(1) to SW1(1,2,3,4,5,6,7,8)+SW2(1,2,3,4,5) up |
| Material |
ABS |
| Dimensions W x H x D mm |
138x77x28 |
Specifications:
| Item |
CD102 |
CD102A |
CD104 |
CA101 |
CA101A |
CA404 |
| Video Input Channel |
1 |
1 |
1 |
1 |
1 |
4 |
| Video Output Channel |
2 |
2 |
4 |
1 |
1 |
4 |
| Audio Input Channel |
X |
X |
X |
X |
1 |
X |
| Audio Output Channel |
X |
X |
X |
X |
1 |
X |
| Video Input Level |
0.8~1.2Vp-p, 75 Ohms |
| Video Output Level |
1Vp-p (Standard), 75 Ohms |
| Video Bandwidth |
10hz - 10MHz |
| Transmission Range |
X |
1000 meters |
| Power Supply |
DC 12V / AC 24V |
| Power consumption |
100mA |
320mA |
100mA |
220mA |
| Dimensions (mm) |
72x50x32 |
138x84x28 |
| Weight |
90 |
130 |
110 |
240 |
| Material |
ABS Black |
Specifications:
| Item |
CD108 |
CD480 |
CD408A |
CD816 |
CD816A |
| Video Input Channel |
4 |
4 |
8 |
| Video Output Channel |
8 |
8 |
16 |
| Video Input Level |
0.8~1.2Vp-p, 75 Ohms |
| Video Bandwidth |
10hz - 10MHz |
| Power Supply |
DC 12V |
DC 15V / AC 24V |
| Power consumption |
500mA |
1000mA |
500mA |
| Brightness |
X |
X |
V |
X |
V |
| Sharpness |
X |
X |
V |
X |
V |
| Dimensions (mm) |
150x133x44mm |
482x170x44mm |
| Weight |
0.5 kg |
0.6 kg |
2.6 kg |
| Material |
Metal & ABS Black |
Metal Black |
Application:
CD102, CD104 both are one video input to multi video output distributor. CA404, CA104A both are amplifiers for long- range video transmission up to 1000 meters over RG59 coaxial cable without any video signal loss. They are suitable for far distance, different floor in a building or different electrical field.
<<< Previous Next >>>
|
Unshielded Installations 
